Copyright © ZTEWeLink Technology Co., LTD, All rights reserved.
44
GE2015
Dev Board User Guide
5.5.
C
ONTROL AND
I
NDICATION
I
NTERFACES
The control and indication interfaces on GE2015 contain 3 control buttons (power-on, reset and wake-up) and 4 indicator lights (MODULE_READ,
AP_WAKEUP_MODULE, MODULE_WAKEUP_AP, and MODULE_POWERON)
5.5.1.
C
ONTROL
B
UTTON
1 Power-on Button
S2 is the PWR_ON button, low level active. Connect to jumper TP15 can set POWER_ON as always low to power on module once connect to the mother board to
power supply. The location of PWR_ON button and Jumper TP15 are shown in the figure below.
1. When the interface board is GE2015_SB_B, connect to jumper TP15 can set POWER_ON as always low to power on module once connect to the mother board to
power supply.
2. When the interface board is GE2015_SB_ME3630PCIE, no matter TP15 is connect or not, the module will power on once connect to power supply
