Copyright © ZTEWeLink Technology Co., LTD, All rights reserved.
32
GE2015
Dev Board User Guide
4.2.
R
UN
H
YPER
T
ERMINAL OR
O
THER
COM
T
OOL ON
PC
1) Open corresponding UART interface.
2) Set the COM of hyper terminal as 115200-8-N-1
4.3.
P
OWER
S
UPPLY
1) Power on power adapter, the 3V6 indicator light will light up.
2) Turn switch S4 to power side of power adapter.
3) Module power-on, the 3V3 indicator light will light up.
4) Press PWR_ON button at least 200mS.
5) Input AT command to PC hyper terminal, and OK will return.
6) Input AT+CSQ, will CSQ: 31, 99 OK.
7) GE2015 and module are in normal operating status.
Note: Before you connect the DVK to you PC through USB/UART, Please make sure that the driver of module has been installed.
