ZTechnik
PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.ZTechnik.com / e mail: [email protected]
©2011 National Cycle, Inc.
Page 4 of 5
10-118585-000 12/11
Figure 9, Large Turn Signals
Figure 13
Figure 12
R12R MODELS WITH LARGE TURN SIGNALS
Route turn signal through bracket and re-install
turnsignal. Check operation of turn signals. (T30
Torx Wrench) Figure 9
Install shroud. Figure 10
6. INSTALL WINDSHIELD
Insert grommets (6) into windshield.
Figure 11
Flex shield, to align holes with the mount points.
Figure 12
Install aluminum caps (5) using the M6 Screws (4)
(6mm Allen Wrench) Figure 13
Tighten securely.
(4mm Allen Wrench)
Figure 10, Large Turn Signals
Figure 11
