PREPARATION
Right and left side of motorcycle is determined
while sitting on the bike.
Position the motorcycle securely on its stand.
Cover the front fender while you work.
R12R MODELS WITH SMALL TURN SIGNALS
There is no need to remove turn signals. Turn signal
housing will fit through bracket.
GO TO PAGE 3. FIGURE 1
R12R MODELS WITH LARGE TURN SIGNALS,
FIGURE 2
1.
Remove headlight shroud.
Figure 3
2.
Disconnect Turnsignals.
Figure 4
3.
Remove turnsignal.
(T30 Torx Wrench) Figure 5
ZTechnik
PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.ZTechnik.com / e mail: [email protected]
©2011 National Cycle, Inc.
Page 2 of 5
10-118585-000 12/11
Figure 2, Large Turn Signals
Figure 1, Small Turn Signals
Figure 3
Figure 4
Figure 5
