Zte ZXV10 W811N User Manual Download Page 5

Page: 5 / 57

Safety

Safety Precautions

Precautions

Installation

Use the default power adapter accompanying the equipment. Otherwise, the equipment

may be damaged or not be functioning properly.

Pay close attention to the load of the power socket or power cable. The overloaded power

socket or damaged power cable/connector may trigger electric shock or fire. Check rele-

vant cables periodically and replace the damaged cables immediately.

Ensure proper heat dissipation space to prevent this product and relevant accessories from

overheat-caused issues. Do not block the heat dissipation holes with any objects.

Keep this product away from heat sources, high temperature, or sunlight.

Keep this product away from damp or moisture places.

Do not put this product onto an unstable surface.

Usage

When you are not using this product or want to clean it, power off this product and remove

power cables. Pay attention to the power adapter surface where the temperature may be

high.

Wait at least 15s between two equipment startups.

Protect this product from damages caused by lightning or abrupt increase of the current or

voltage. Remove the power cable if this product is to be unused for a long period of time.

Service

Do not disassemble this product without authorization; otherwise, the warranty of this product

will become ineffective. Contact your service provider when any of the following occurs on this

product:

The power cable or connector is damaged.

Certain liquid falls into this product accidentally.

This product is soaked with rain or other liquid.

This product cannot work even when no operation instructions are violated.

The shell of this product is damaged after fallen down or seriously struck.

The indicators of this product are working abnormally.

Summary of Contents for ZXV10 W811N


























































Search results

Summary of Contents for ZXV10 W811N

Reviews:

Related manuals for ZXV10 W811N

Brands by name

Popular brands

Zte ZXV10 W811N, User Manual

Search results

Summary of Contents for ZXV10 W811N

Reviews:

Related manuals for ZXV10 W811N

Brands by name

Popular brands