Zte ZXV10 W811N User Manual Download Page 47

Page: 47 / 57

Soft rest the device or restore the default settings of the device.

Click

Reboot

to restart the device.

Click

Restore Default

to restore the default settings of the device and then restart the

device.

9.3.2

Setting

Setting Version

Version

Version Upgrade

Upgrade

Upgrade Parameters

Parameters

Note:

During software upgrade of the device, pay attention to the prompts displayed on the
page and wait patiently. Do not power off or restart the device. Otherwise, the
device may be damaged.

Choose [

Administration→System Management→Software Upgrade

] from the main

menu. The

Software Upgrade

page is displayed, as shown in the following figure.

Click

Browse

to select the required software version file.

Click

Upgrade

to upgrade the software version file.

9.3.3

Managing

Managing User

User

User Settings

Settings

Choose [

Administration→System Management→User Configuration Management

]

from the main menu. The

User Configuration Management

page is displayed, as shown

in the following figure.

Summary of Contents for ZXV10 W811N


























































Search results

Summary of Contents for ZXV10 W811N

Reviews:

Related manuals for ZXV10 W811N

Brands by name

Popular brands

Zte ZXV10 W811N, User Manual

Search results

Summary of Contents for ZXV10 W811N

Reviews:

Related manuals for ZXV10 W811N

Brands by name

Popular brands