background image

 

ZXV10 H11X (V1.0)Home Gateway User’s Manual

 

92 

Confidential and Proprietary Information of ZTE CORPORATION

 

IPSec Configuration 

Setting RSA Key 

Click the 

IPSec

 link on the left part of the WEB page to enter the 

IPSec page, where you can check and update the RSA key adopted 

at IPSec security negotiation. 

 

 

 

Re-generate RSA keys 

Updating RSA keys; This product supports PSK shared 
secret and RSA digit signature as the negotiation 

authentication mode. If you select the RSA digit signature 
authentication mode, correctly fill in the RSA 

authentication key of the peer party. The user can update 
the RSA key as required, and send it to other users to set 

up IPSec security connections with him. 

 

Note: 

The default condition for updating RSA key is 

that the system has no security connection, or else 

the button will be automatically disabled. To reset 

the RSA key, delete the existing security 

connection, and then enter the IPSec page to update the RSA key. 

 

Summary of Contents for ZXV10 H11X




















































































































































Reviews: