Chapter 3 - Preparations for Configuration
Confidential and Proprietary Information of ZTE CORPORATION
29
Checking Configuration
After the above preparations, switch on the H110. You will see that
the power indicator is on. At the same time, the H110 executes the
device start-up process and detects all the connected devices. From
the indicators, you can see the devices of which network interfaces
are successfully connected with the H110. The indicator
corresponding to the network interface with successful device
connection will be always on.
In addition, you can use the
Ping
command to check the network
connection between the PC and the H110 by taking the following
steps:
Click the
Start
button, and select
Run.
Key in
cmd
in the pop-up
Run
dialog box and then press
Enter.
Key in
ping 192.168.1.1
at the cursor position in the pop-up
interface and then press
Enter
.
If the following information
appears:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=2ms
TTL=64
It indicates that the PC has been successfully connected to the
H110.
If the following information occurs:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
It indicates an error occurs in the installation. Please check the
following items in turn:
