Zte ZXV10 H11X User Manual Download

Page: 20 / 147

ZXV10 H11X (V1.0)Home Gateway User’s Manual

Confidential and Proprietary Information of ZTE CORPORATION

System Requirements

Support of ISP is required. You should be able to get the service

from an ISP via WAN access.

If necessary, an Ethernet hub and some Ethernet cables can be

added to construct a small/medium-sized Intranet.

One PC equipped with the 10 Mbps, 100 Mbps or 10/100 Mbps

Ethernet adapter

For wireless access, PC need to configure or have a built-in

802.11g/b wireless network adapter.

Each PC to access the network should operate in at least one

operating system out of Windows 98/ME/2000/NT/XP or Linux,
be correctly equipped with the network adapter driver and

TCP/IP protocol, and have correct network settings.

This product is set to use the fixed IP address (Static IP) or the

IP address allocated in PPPoE/DCHP dial-up. You also need to set

the gateway server address and the DNS server address

provided by your ISP.

One PC of the LAN should be equipped with the WEB explorer

(Microsoft Internet Explorer 6.0 or above, or Netscape

Communicator 4.0 or above should be installed in).

Summary of Contents for ZXV10 H11X




















































































































































Search results

Summary of Contents for ZXV10 H11X

Reviews:

Related manuals for ZXV10 H11X

Brands by name

Popular brands

Zte ZXV10 H11X, User Manual

Search results

Summary of Contents for ZXV10 H11X

Reviews:

Related manuals for ZXV10 H11X

Brands by name

Popular brands