Zte ZXHN H3600 Maintenance Management Manual Download

Page: 90 / 100

ZXHN H3600 Maintenance Management Guide

Figure 8-7 Restore Configuration Management Page

2. Click

Browse

to select the user configuration file, and then click

Restore Configura-

tion

to restore the device to the user configuration.

8.4 Configure the Mirror function

This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the WAN side will be copied to the
specified LAN interface, and it can be used for the network analysis and troubleshooting.

Steps

1. On the main page of the ZXHN H3600, select

Management&Diagnosis > Mirror

Configuration

to the

Mirror Configuration

page, see

Figure 8-8

Figure 8-8 Mirror Configuration Page

2. Configure the mirror configuration parameters.

Table 8-3

lists the user mirror configuration parameters.

Table 8-3 Parameter Descriptions for the Mirror Configuration

Parameter

Description

Mirror

Click

to enable the mirror function.

Click

Off

to disable the mirror function.

Source

Network-side WAN interface.

Destination

User-side LAN interface.

3. Click

Apply

button to apply the changes.

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands