Zte ZXHN H3600 Maintenance Management Manual Download

Page: 34 / 100

ZXHN H3600 Maintenance Management Guide

Parameter

Description

Name

To create a QoS classification, enter the name of the classifica-
tion.

Classification Priority

It can be modified by ISP.

Packets Classification Criterion

All Interface

Set radiobox

to enable all Interface.

Ingress

Specify the data traffic direction.

Source MAC Address

Source host MAC address.

Destination MAC Address

Destination host MAC address.

802.1p

Specify the 802.1p value to modify the service priority.

VLAN ID

Identifies a VLAN. Range: 0–4094. To ensure normal service op-
eration, the

VLAN ID

must be the same as that set in upper-layer

configuration.

Level 2 Protocol

The level 2 protocol includes: Unconcerned, IPv4, IPv6,

ARP

and

PPPoE

Source IP

Source host IP address.

Destination IP

Destination host IP address.

DSCP

DSCP value.

Level 3 Protocol

The Level 3 Protocol includes: Unconcerned,

TCP

UDP

and

ICMP

Source Port

Source port number of the matching packets.

Destination Port

Destination port number of the matching packets.

TCP ACK

Set radiobox

to enable the function of TCP ACK.

Packets Classification Result

802.1p Re-marking

802.1p identifier value.

DSCP Re-marking

DSCP identifier.

Queue Priority

Range:1-8.

3. Click

Apply

button to apply the changes.

5.3.3 Configure the QoS Congestion Management

The procedure provides the parameters of QoS congestion management configuration
features.

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands