5 Configure the Internet
Table 5-2 3G Configuration Process
Steps
Operations
Instructions
1
Insert 3G device.
Null.
2
Check the 3G device status.
The signal strength can verify whether the network card is
plugged.
3
Create a 3G WAN connec-
tion.
Click
on the page, and create a
new 3G connection.
4
Check the 3G connection sta-
tus.
The IP address getting from carries can verify that the 3G
WAN Connection based on IPv4 was completed success-
fully.
Note
What to do when 3G device is not ready?
1. Check whether the dongle is plugged in.
2. If the device is already plugged in, please check whether the USB is contacted well.
3. If the device is still unrecognized, maybe it has been damaged. Please replace the
device.
Steps
1. Insert 3G device.
2. On the main page of the ZXHN H3600, select
Internet > Status > 3G > Mobile Net-
work
to the
Mobile Network
page. The signal strength can verify the network card is
plugged, as shown in
.
Figure 5-6 Mobile Network
3. On the main page of the ZXHN H3600, select
Internet > WAN > 3G
to the
3G Con-
nection
page, as shown in
SJ-20201203151144-003 | 2021-06-16(R1.0)
23
Summary of Contents for ZXHN H3600
Page 6: ...IV ...
