ZXHN H168N Maintenance Management Manual
Figure 5-15 4in6 Tunnel Connection
2.
Click
to create new 4in6 Tunnel.
lists the New 4in6 Tunnel parameters.
Table 5-3 New 4in6 Tunnel parameters
Parameter
Description
Tunnel Name
Name the new 4in6 Tunnel.
Tunnel Type
4in6 tunnel type.
Connection
Select the
connection.
Interface
Address
Set this parameter if
Tunnel Type
is set to
DS-Lite
.
Interface address on the
DS-Lite
tunnel. The range
defined by RFC is from
192.0.0.2
to
192.0.0.6
.
Manual AFTR
Select On/Off Manual AFTR function.
AFTR
Setting this parameter when
Manual AFTR
in
On
.
3.
Click
Apply
.
– End of Steps –
5.2.4 Configuring 6in4 Tunnel Connection
This page provides the parameters of 6in4 Tunnel configuration features.
Steps
1.
On the main page of the ZXHN H168N, select
Internet > WAN > 6in4 Tunnel
to go to
the
6in4 Tunnel
page, as shown in
.
5-14
SJ-20140220172310-002|2014-03-03 (R1.0)
ZTE Proprietary and Confidential