Chapter 3
Configuration Preparation
Table of Contents
3.1 Configuring TCP/IP
This procedure introduces how to configure
for the ZXHN H168N device
configuration.
To ensure that the ZXHN H168N device accesses the Internet successfully, confgure the
computer address in the same network segment as the ZXHN H168N address.
The default network settings for the ZXHN H168N are as follows:
l
address:
192.168.1.1
l
Subnet mask:
255.255.255.0
l
Default gateway:
192.168.1.1
Steps
1.
Configure
a.
In
Local Area Connection Properties
dialog box, select
Internet Protocol
(TCP/IP)
.
b.
Click
Properties
to open the
Internet Protocol (TCP/IP) Properties
dialog box.
c.
In the
Internet Protocol (TCP/IP) Properties
dialog box, select
Use the
following IP address
. Set
IP address
,
Subnet mask
, and
Default gateway
.
For example, set the
address to
192.168.1.7
, the subnet mask to
255.255.255.0
, and the default gateway to
192.168.1.1
.
d.
Click
OK
.
Note:
The settings may change with the network requirements. However, perform the
steps above at the first time.
2.
Check the
settings.
3-1
SJ-20140220172310-002|2014-03-03 (R1.0)
ZTE Proprietary and Confidential
