Zte OX253P, User Manual

Page: 57 / 279

Chapter 6 The LAN Configuration Screens
OX253P User ’ s Guide
58
6.4.1 IP Static Route Setup
Click an Edit icon in ADVANCED > LAN Configuration > IP Static Route to
edit a static route in the OX253P.
Figure 15 Advanced> LAN Configuration > IP Static Route Setup > Edit
The following table describes the labels in this screen.
Active This field shows whether this static route is active ( Yes ) or not ( No ).
Destination This field displays the destination IP address(es) that this static route
affects.
Gateway This field displays the IP address of the gateway to which the OX253P
should send packets for the specified
Destination . The gateway is a
router or a switch on the same network segment as the device's LAN or
WAN port. The gateway helps forward packets to their destinations.
Action Click the Edit icon to modify this item.
Click the Delete icon to remove this item.
Table 15 Advanced> LAN Configuration > IP Static Route (continued)
LABEL DESCRIPTION
Table 16 Advanced> LAN Configuration > IP Static Route Setup > Edit
LABEL DESCRIPTION
Route Name Enter the name of the static route.
Active Select this if you want the static route to be used. Clear this if you do
not want the static route to be used.
Private Select this if you do not want the OX253P to tell other routers about this
static route. For example, you might select this if the static route is in
your LAN. Clear this if you want the OX253P to tell other routers about
this static route.
Destination IP
Address Enter one of the destination IP addresses that this static route affects.