Zte OX253P User Manual Download Page 20

Page: 20 / 279

Chapter 1 Getting Started

OX253P User

’

s Guide

1.3 Good Habits for Managing the Device

Do the following things regularly to make the OX253P more secure and to manage
the OX253P more effectively.

•

Change the password. Use a password that

’

s not easy to guess and that consists

of different types of characters, such as numbers and letters.

•

Write down the password and put it in a safe place.

•

Back up the configuration (and make sure you know how to restore it).

Restoring an earlier working configuration may be useful if the OX253P becomes

unstable or even crashes. If you forget your password, you will have to reset the

OX253P to its factory default settings. If you backed up an earlier configuration

file, you would not have to totally re-configure the OX253P. You could simply

restore your last configuration.

Strength
Indicator

The Strength Indicator LEDs display the Received Signal Strength Indication
(RSSI) of the wireless (WiMAX) connection.
5 Signal LEDs

The signal strength is greater than or equal to -59 dBm.

4 Signal LEDs

The signal strength is between -69 and -60 dBm.

3 Signal LEDs

The signal strength is between -79 and -70 dBm.

2 Signal LEDs

The signal strength is between -89 and -90 dBm.

1 Signal LED

The signal strength is between -90 and -95 dBm.

0 Signal LEDs

There is no WiMAX connection.

Activity
Indicator

Off

The OX253P is not ready.

Green

The OX253P is connected to the network.

Blinking

The OX253P system is booting up or the OX253P is seeking
a viable signal.

Table 2

The OX253P

LED

STATE

DESCRIPTION

Summary of Contents for OX253P
























































































































































































































































































Search results

Summary of Contents for OX253P

Reviews:

Brands by name

Popular brands

Zte OX253P, User Manual

Search results

Summary of Contents for OX253P

Reviews:

Brands by name

Popular brands