ZTE N9511 User Manual
80 Confidential and Proprietary Information of ZTE CORPORATION
During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency
bands , and placed in positions that simulate RF exposure in usage against the head with no separation,
and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
The exposure standard for wireless devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.
This device is compliant with SAR for general population /uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and Canada RSS 102, and has been tested in accordance with the measurement methods and
procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested
and meets the FCC, IC RF exposure guidelines when tested with the device directly contacted to the body.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone
is on file with the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid
after searching on FCC ID: SRQ-ZTEN9511.
For this device, the highest reported SAR value for usage against the head is 1.41 W/kg, for usage near the
body is 1.28 W/kg.
While there may be differences between the SAR levels of various phones and at various positions, they
all meet the government requirement.
SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit
and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level
compliant or lower than the reported level. To support body-worn operation, choose belt clips or holsters
which do not contain metallic components, and maintain a separation of 10 mm between this device and
your body.
RF exposure compliance with any body-worn accessory which contains metal was not tested and certified,
and use of such body-worn accessories should be avoided.
Hearing Aid Compatibility (HAC) Regulations for Mobile Phones
In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids and
cochlear implants. Although analog wireless phones do not usually cause interference with hearing aids or
cochlear implants, digital wireless phones sometimes do because of electromagnetic energy emitted by the
phone's antenna, backlight, or other components.
Your phone is compliant with FCC HAC regulations (ANSI C63.19).
While some wireless phones are being used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise and phones also vary in the amount of interference they
generate.
The wireless telephone industry has developed a rating system for wireless phones to assist hearing device
users in finding phones that may be compatible with their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a label located on the box. The ratings are not
guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing
device happens to be vulnerable to interference, you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to
hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing
device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/ higher of the
two ratings. (Note that not all hearing devices have telecoils in them.)
Summary of Contents for N9511
Page 1: ...ZTE N9511 User Manual ...
