Zte MF29A, User Manual

Page: 26 / 48

26
Step Description
2.Select WDS mode:
Disable, Lazy Mode,
Bridge Mode or Re-
peater Mode
• If you select Disable , WDS is disabled.
• If you select Lazy Mode , WDS is enabled,
and set wireless MAC address only on the
peer APs.
• If you select Bridge Mode , WDS is
enabled, and set the peer APs wireless
MAC address on router. When you set
Bridge Mode , your PC can not search
SSID of AP after connected.
• If you select Repeater Mode , WDS is
enabled, and set the peer APs wireless
MAC address on router. When you set
Repeater Mode , your PC can search
SSID of AP after connected.
3.Select Phy mode :
CCK,OFDM, HTMIX
or GREENFIELD
CCK : 802.11b
OFDM : 802.11g
HTMIX : 802.11b/g/n Mixed Mode
GREENFIELD : 802.11b/g Mixed Mode
4.Select Encrypt
Type :
WEP, TKIP, AES
If you select NONE , all the data transmitted
without encryption, and other station can ac -
cess router.
If you select the Encrypt Type, you should set
all APs the same Encrypt type and password
to make the data transfer.
5.Set peer AP's wire -
less MAC address on
router
Only Repeater Mode and Bridge Mode
need this.