Zte MF29 User Manual Download Page 7

12

13

Connecting to the Internet

Connect the 

WAN/LAN

  interface  to  the  Internet  with  an  Ethernet 

cable (RJ45).

Connecting with External Power

Connect the external power adaptor to a standard power outlet. In

-

sert the plug into the power socket at the rear of the router.

Switching on Your Device

1.   Turn the power switch on to get started. Make sure that the 

phone is on hook before powering on.

Notes:
Do not put anything on the top of the router. Do not lay routers to 

overlap each other when using.

2.  Wait 1~2 minutes after turning the router on before you use the 

service. The 3G & POWER indicator should be lit on.

Notes:

When the router is turned off, an incoming caller will hear the prompt 

like “The number you have dialed is currently unavailable.”
If the net mode indication LED is blinking constantly, try to move the 
router to another location. The router takes 1~2 minutes to initialize, 

attach to the network and obtain an IP address.

Power Supply

For  normal  operation,  connect  the  router  to  the  external  power 
adapter. In case of power failure or when there is no available exter

-

nal power supply, the router will not work.

Voice

Making a Call

You can make a call through VoIP. The VoIP number is provided by 

your service operator. Please contact your service operator to get 
detailed information.
To make a call:
1.   Pick up the handset.

2.   Key in the telephone number.
3.   You can either press # key on the telephone to send the call, or 

wait 4~8 seconds for the call to be connected automatically.

4.   Call will be connected.

Note:

If there is no 3G indication, the RF signal is unavailable. Change the 
location of the router and make sure nothing is blocking it.

Making a Trunk Call

If you are making a trunk call, add the area code as normal.

E.g. 03 9612 3456

Making an International Call

If you are making an international call, key in the international ac-

cess code followed by the country code, area code and number.

E.g. 00 11 64 12 345678

Answering a Call

When the phone rings, pick up the handset to answer it. If the tele

-

phone  has  hands-free  function  you  also  can  answer  the  call  by 

pressing the 

Hands-free

 button. Press the 

Hands-free

 button again 

to end the call.

MF29T User Manual V1.1-0703.indd   12-13

2012-7-3   16:46:29

Summary of Contents for MF29


























Reviews: