34
35
•
Key Renewal Interval
: Define how long the key should be
renew.
You can set
Wireless MAC Filtering
:
•
Wireless Disable
: If disabled, MAC address is not used to
control network access.
•
Wireless Allow
: Set the MAC address that is allowed to access
network.
•
Wireless Reject
: Set the MAC address that is not allowed to
access network.
Click
Apply
to confirm your configuration.
WPS
Select
Wi-Fi Setting > WPS
, the WPS configuration is shown in the
following figure:
Select
Enable
, click
Apply
, the WPS settings are shown in the fol
-
lowing figure:
WPS Summary, WPS Progress and WPS Status are all shown in
the figure.
To set WPS, select WPS mode, the two modes are described below:
•
PIN
: There are two ways to use PIN mode, one is set PIN code
on the client's wireless adapter(you can find the PIN code in
AP
PIN
field of
WPS Summary
), the other way is set the client's PIN
code in
Client PIN
field.
•
PBC
: Press the WPS button of the router or select PBC, and
then click
Apply
. Press WPS button on the client wireless
adapter within two minutes, and the negotiation process will be
established.
Firewall
You may setup firewall rules to protect your network from virus,
worm and malicious activity on the Internet. This function is not
available on
Bridge
mode.
Notes:
You can set the maximum 10 filtering items for
MAC/IP/Port Filter-
ing
and
Port Forwarding
.
MAC/IP/Port Filtering
Select
Settings > Firewall > Mac/IP/Port Filtering
, the Mac/IP/Port
Filtering is shown in the following figure:
If you select
Enable
, the filter settings will appear:
MF29T User Manual V1.1-0703.indd 34-35
2012-7-3 16:46:32
