50
51
4. Press the WPS button on the access point, and it will recognize your phone
and add it to the network.
Method two: PIN
1. Tap the
Arrow
or swipe up from the bottom of the home screen, and
tap
Settings
>
Wi-Fi
.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap
>
Advanced
>
WPS Pin Entry
.
4. The WPS PIN displays on the screen. Enter the PIN into the access point’s
setup page.
After entering the PIN, your phone automatically finds the access point and
configures the connection.
Note:
For detailed information about the WPS feature of the access point,
please refer to its documentation.
Adjusting advanced Wi-Fi settings
1. Tap the
Arrow
or swipe up from the bottom of the home screen,
and tap
Settings
>
Wi-Fi
.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap to adjust the following settings:
•
Saved networks:
View a list of saved networks.
•
Network notification:
Enable notifications when Wi-Fi is on and an
open network is available.
•
Keep Wi-Fi on during sleep:
Set conditions for keeping Wi-Fi on in
sleep mode.
•
MAC address:
Check the MAC address.
•
IP address:
Check the phone’s IP address.
- or -
CONNECTING TO NETWORKS AND DEVICES
Tap
>
Advanced
to adjust the following settings:
•
Install certificates:
Install certificates needed for connecting to certain
Wi-Fi networks.
•
Wi-Fi Direct:
Use the Wi-Fi Direct feature. (See
Connecting to networks
and devices – Using Wi-Fi Direct
.)
•
WPS Push Button:
Connect to a WPS network via the push button
method.
•
WPS Pin Entry:
Connect to a WPS network via the phone PIN method.
Using Wi-Fi Direct
Wi-Fi Direct allows Wi-Fi devices to share files and data directly by connecting
to each other without the need for wireless access points (hotspots).
Note:
Activating this feature will disconnect your current Wi-Fi network
connection.
Connecting to another device via Wi-Fi Direct
1. Tap the
Arrow
or swipe up from the bottom of the home screen, and
tap
Settings
>
Wi-Fi
.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap
>
Advanced
>
Wi-Fi Direct
. Your phone will search for other devices
enabled with Wi-Fi Direct connections.
4. Tap a device name below Peer devices to connect with it.
The other device will receive a connection prompt and need to accept
the request for connection. Both devices may need to enter a common
PIN. If prompted, tap
ACCEPT
.
5. Once connected, the device is displayed as “Connected.”
CONNECTING TO NETWORKS AND DEVICES
Summary of Contents for BLADE X
Page 1: ...1 ZTE Blade X User Guide ...
Page 77: ...150 Notes ...