7
Getting Started
A002ZT
USIM Card
USIM Card is an IC card that contains customer information
including phone number.
Handling USIM Card
For USIM Card handling, see the following items.
IC chip
For USIM Card handling, see SoftBank Website.
https://www.softbank.jp/mobile/support/protect/usim/
・Always keep the IC chip clean.
・Wipe clean with a dry, soft cloth.
・Avoid applying labels. May damage USIM Card.
USIM Card Cautions
Observe the following when using USIM Card.
・Customer is responsible for any damage caused by
inserting USIM Card in an other-brand IC card reader, etc.
SoftBank Corp. is not responsible in such case.
・USIM Card is the property of SoftBank Corp.
・USIM is replaceable (at cost) in case of loss/damage.
・Return USIM Card to the company when cancelling
subscription.
・Returned USIM Cards are recycled for environmental
purposes.
・Note that USIM Card specifications and performance may
change without notice.
・It is recommended that you keep a separate copy of
information that is stored on USIM Card. SoftBank Corp.
is not responsible for damages from stored information
that is lost.
・Always follow emergency procedures to suspend service
if your USIM Card or USB modem (USIM Card inserted) is
lost/stolen. For details, contact
・Power off USB modem before installing/removing USIM
Card. Removing USIM Card while USB modem is operating
may cause USB modem to malfunction.
・USB modem requires a special USIM Card. The special USIM
Card cannot be used in a smartphone.
Installing USIM Card
Be sure USB modem is disconnected from the computer.
Open USIM Card Slot Cover
・With your finger(nail) in the notch on top of the cover, pull
as shown.
Insert USIM Card in USIM Card Slot
・Push and click into place, noting orientation of USIM Card
(notch/IC (gold) chip facing up).
・Be careful not to touch or scratch the IC chip when
installing USIM Card.
Close USIM Card Slot Cover
USIM Card is inserted.
・Align Cover with Slot, and press gently.
Summary of Contents for A002ZT
