background image

112

Safety Precautions

Read safety precautions before using USB modem.
Observe precautions to avoid injury to self or others, or
damage to property.

Labels & Symbols

These indications show degree of risk from improper use.

Mark

Descriptions

Great risk of death or serious injury

1

Risk of death or serious injury

1

Risk of minor injury

2

 or property damage

3

1 Serious injury: This refers to loss of sight, injury, burns 

(high- and low-temperature), electric shock, broken
bones, poisoning, etc. with remaining aftereffects, and
injuries requiring hospital admission or long-term hospital
visitation.

2 Minor injury: This refers to injuries, burns (high- and

low-temperature), electric shock, etc. that do not require
hospital admission or long-term hospital visitation.

3 Property damage: This refers to extended damage to

buildings, furniture, livestock, pets, etc.

These symbols indicate prohibited or compulsory actions. Make
sure you thoroughly understand their meanings before reading
on.

Mark

Descriptions

Prohibited actions

Disassembly prohibited

Exposure to liquids prohibited

Use with wet hands prohibited

Compulsory actions

Unplug Charger from outlet

A002ZT, USIM Card, USB Extension

Cable (ZEDAY1) (Common)

Do not use, store, or leave where heat reaches

a high temperature or accumulates (e.g. near

fire or heater, under/in a kotatsu or bedding,

in direct sunlight, inside a car in the hot sun,

etc.)

May cause fire, burns, injury, electric shock, etc.

Do not put in or place nearby a cooking

appliance such as a microwave oven, or IH

cooktop, or high-pressure container such as a

pressure cooker.

May cause fire, burns, injury, electric shock, etc.

Do not get dirty with or place directly on sand,

soil, or mud. Do not touch with soiled hands.

May cause fire, burns, injury, electric shock, etc.

Do not disassemble or modify.

May cause fire, burns, injury, electric shock, etc.

Do not get wet with water or other liquid 

(beverage, sweat, seawater, pet urine, etc.).

May cause fire, burns, injury, electric shock, etc.

Do not allow liquids such as water (beverage,

sweat, seawater, pet urine, etc.) into

terminals.

May cause fire, burns, injury, electric shock, etc.

Use optional accessories specified by SoftBank.

Using unspecified accessories may cause fire, burns, injury,
electric shock, etc.

Summary of Contents for A002ZT

































































































































Reviews: