6
Quick change system for SPRINT Series
Screw the second nut on the clamping
screw and tighten slightly.
Run the installation described above
with the second horizontal clamping
fixture.
Fig. 3:
Clamping fixture adaptor (side view)
Attach one of the pre-installed
horizontal clamping fixtures with 4
screws and 4 washers on one of the
cleviss, as shown in
.
Thereby tightening the screws only
slightly.
Fig. 4:
Clamping fixture, right side (Fixing scheme)
Attach the second horizontal clamping
fixture mirror inverted on the second
clevis.
Fig. 5:
Clamping fixture, left side
Summary of Contents for SPRINT Series
Page 2: ......
Page 22: ...22 Quick change system for SPRINT Series...
