03/12/2013
Z.R. Tool Inc. - MS31 Manual Sealless Combination Tool for Steel Strapping Operation Manual
www.zrtool.com/html/MS31Manual.html
5/7
Figure 1B
Tilt the internal assembly approximately 20
degrees and place into housing making sure the
back up hook is sitting in its slot in the housing.
Figure 1C
Make sure the cam lever is attached to the
eccentric shaft. Then push it through the hole of
eccentric shaft plunger and the housing until it is
flush.
Figure 1D
Turn the cam with pliers in a clockwise direction
until it sits in position shown in this drawing.
Figure 1E
Turn cam lever in a clockwise direction with fingers
until it sits in front of the cavity of the cam.
Important: Make certain that the roller (position
57) is in its position.
Then install the housing cover and the sealing
lever making sure they sit properly and operate
smoothly, do not force.
Top of page
MS31 DIAGRAM
Click here to view larger image
This Diagram is available in a Portable Document Format (PDF) file. To view it,
