54
This is a high performance product, not a toy.
Do not reproduce figures and risky behavior such as showed on TV or Internet. These are performed by professionals. You risk serious injury, put
your life in danger and risk to seriously damage the equipment if the figures are not done perfectly.
Ensure any trajectory taken opposite the PWC is not too tight, but keep a radius curvature of 4 meters minimum. An aggressive turn leads the Jet
Pack by ZR to over break and makes the PWC take an abrupt turn with the possible cases:
- Fall of the Jet Pack by ZR user
- Fall of the PWC driver
- Breakage of the parts ref. FB02020 – FB02021 – FB02022
- Damage the hose ref. FB02002 / ZR01002 / ZR01002-23 by either causing a separation between the inner and outer layer at the connection with
the strap, causing an immediate or delayed tear of the hose (this does not apply to the X-Armor hose ref ZR01003 / ZR01003-23).
Do not turn 360 ° in front of the watercraft as this may damage the hose ref. FB02002 / ZR01002 / ZR01002-23 by either causing a separation
between the inner and outer layer of the hose at the connection with the strap, or causing an immediate or delayed tear of the hose (this does not
apply to the X-Armor hose ref ZR01003 / ZR01003-23).
The Jet Pack by ZR user and the PWC driver must be sure the distance between the Jet Pack by ZR and the PWC is never less than 4 meters.
When the Jet Pack by ZR is used by 2 persons (without electronic kit – optional, see page 55), the watercraft driver mustn’t exceed 6000 RPM. It is
recommended to use the learning key when using a PWC over 250HP.
The Jet Pack by ZR user and the PWC driver must be sure that the Jet Pack by ZR user has sufficient stability and does not fall on his back before a
new step in height.
