Zotac ION ITX series, User Manual

Page: 18 / 46

17
Hardware Installation
Expansion Slots
The motherboard contains two expansion slots: one Mini PCIe slot and one PCIe x1 slot.
. .
.
1
51
2
52
Mini_PCIEX1
PCIEX1
Mini PCIe Slots-Mini_PCIEX1
There is one Mini PCIe slot, reserved for the WiFi Module.
PCIe x1 Slot-PCIEX1
There is one PCI Express x1 slot that is designed to accommodate less bandwidth intensive
cards, such as a modem or LAN card.
Jumper Settings
This chapter explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
Close Open * = Default setting.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
JP1 Selection
1-2* Normal *
2-3 CMOS Clear
1
1