©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
28
To start the smoothing process, select START in the main menu. In the first step you have
to specify the type of the 3D print which is going to be smoothed. There are two options
available:
SHELL
- for prints with thin walls and NORMAL - for prints with thick sections.
In the next step you have to choose the material type which has been used to print the
model. The materials compatible with the device are: Z-ABS, Z-ULTRAT, Z-ASA Pro, Z-UL-
TRAT Plus and Z-HIPS. Then select the solvent type which is going to be used for smo-
othing: either acetone or butanone (MEK), depending on the material used for printing.
The device will mark the solvent type recommended for the previously selected material.
Summary of Contents for Apoller
Page 1: ...Device User Guide Apoller...
