13
GAS CONVERSIONS
Transformation For The Gas Cookers Replacement Of Injectors
The gas burners adapt to different types of gas, by replacing the
corresponding injectors to gas on use .
There fore it is necassery to;
* Cut off the feeding gas flow and electric current.
* Remove the cap and the adapter.
* Unscrew the injectors.
* Replace the injector with the ones corresponding to the type of
gas that is going to be used , according to the information on the
transformation chart.
Adjusting The Reduced Flame Position
For reduced flame position the by pass screw must be
loosened in transformation from LPG to NG. In transformation from NG to LPG , the same
screw must be fastened.
* Make sure that the appliance is unpluged from the electric current and the gas feed is
open .
* Ignite the burners and leave them on in minimum position.
* Remove the knobs and rubber seals because the screws are accesible only when the
knobs and the seals are removed.
* This procedure must be reprated for each of the valves.
