Bgate-GT10-D24-N22-P
Zoomnet Confidential Proprietary
@ 2013 Zoomnet Corporation. All rights reserved
12
#iwconfig wifi0_wlan0 rate 54M
enc:
Set or manage WEP secret key. It can be set 4 keys on each radio module, you can
choose 1~4 to activate the key.
key:
It is the same as enc
Instance:
#iwconfig wifi0_wlan0 key [2] DEAD_BEEF_EA
#iwconfig aht0 key [1] s:AnASCIIkeyVal
#iwconfig wifi0_wlan0 key off
power :
Set Power Management.
nickname:
Set a nickname for the interface, and it is not supported right now..
nwid:
Network ID, and it is not supported right now. .
ap:
Set unicast or broadcast IP address for AP, and it is not supported right now..
Txpower:
Set Tx Power.This Tx Power is controlled by regulatory limits in the code of drive
program .
Instance: #iwconfig wifi0_wlan0 txpower 30
Sens:
Set sensitivity, no insignificance, and it is not supported right now. .
retry :
Set Retry Limit, and it is not supported right now. .
rts:
Set RTS Threshold.
Instance:
#iwconfig wifi0_wlan0 rts 64
Frag:
Set Fragmentation Threshold
Instance:
#iwconfig wifi0_wlan0 frag 512
Modulation:
Set modulation; note that it isn’t the wireless mode.
Commit:
Submit the setting, and it is not supported right now..
3.2.3 iwpriv
iwpriv command is a utility tool used to manage and configure parameters of wireless
radio-frequency.
Online help is as followss:
Usage: iwpriv interface [private-command [private-arguments]]
Function of iwpriv command is powerful, mainly used to configure parameters and function
of wireless radio-frequency.
Major function is described as below:
2. Set the chainmask value for sending and receiving
