Bgate-GT10-D24-N22-P
Zoomnet Confidential Proprietary
@ 2013 Zoomnet Corporation. All rights reserved
17
Input “fitap”or “fatap” according to the AP mode
Input “reboot”
Enter the command line and input “fitap”or “fatap” then press
<Enter>
. It can set the AP
mode.
Figure 4-1 Setting AP mode through serial port
5
Common Operation in Fat AP Mode
Tip
：
：
：
：
In this chapter, we take WiFlex WF-Z1 as example.
5.1 Check AP information
Step 1 Login AP through serial port or telnet tool.
Step 2 Run “show version” command
Figure 5-1 Check AP version
5.2 Create VAP
Step1 Login the WEB page of AP
Step2 Click
[wireless settings/APsettings]
to access to the page of virtual AP settings.
Step3 Select “2.4G” or “5.8G” wireless network adapter according to actual needs to.
Step4 Fill in the parameter values of VAP:
1
）
Status:
Activate VAP when check it
2
）
Broadcast SSID:
Check it then AP broadcast the SSID, otherwise hide the SSID
3
）
SSID:
Name of network
4
）
WMM:
Enable or disable the WMM control
