Zoomlion ZCC1100H, Operator'S Manual

Page: 244 / 291

Operator’s Manual for Crawler Crane
A
s
s
e
m
b
ly
a
n
d
D
is
m
a
n
tli
n
g
5-38
When different length of main boom is required, crane operator only needs to disconnect main
boom pivot section from main boom head, and then install main boom intermediate sections
between them. In this way, main boom can be assembled to required length. The assembly of
main boom from 42'8" (13m) to 219'10" (67m) is shown in the table 5-8.
Table 5-8 Assembly of main boom
Main boom
length
Assembly sequence of
main boom sections
Main boom
length
Assembly sequence of main boom
sections
42'8"(13m) G11+G12 141'1"(43m) G11+G13+3×G15+G12
52'6"(16m) G11+G13+G12 150'11"(46m) G11+G14+3×G15+G12
62'4"(19m) G11+G14+G12 160'9"(49m) G11+G13+G14+3×G15+G12
72'2"(22m) G11+G15+G12 170'7"(52m) G11+G13+4×G15+G12
82'(25m) G11+G13+G15+G12 180'5"(55m) G11+G14+4×G15+G12
91'10"(28m) G11+G14+G15+G12 190'4"(58m) G11+G13+G14+4×G15+G12
101'9"(31m) G11+G13+G14+G15+G12 200'2"(61m) G11+G13+3×G15+G15A+G15+G12
111'7"(34m) G11+G13+2×G15+G12 210'(64m) G11+G14+3×G15+G15A+G15+G12
121'5"(37m) G11+G14+2×G15+G12 219'10"(67m) G11+G13+G14+3×G15+G15A+G15+G12
131'3"(40m) G11+G13+G14+2×G15+G12
DANGER
(1) Principle for assembling main boom: when connecting main boom intermediate
sections to main boom pivot section, always bolt the shorter intermediate sections
first.
(2) The combination of 219'10" (67m) main boom in above table is preferable
combination.
(3) The tip boom can be assembled on main boom mentioned above, except for 210'
(64m) and 219'10" (67m) main boom.
(4) Intermediate tensioner must be fitted on 210' (64m) and 219'10" (67m) main boom.