RT-223 Appendix
ZOOM RT-223
75
COMP EQ Module
Parameter description
[Table 1 Synchronization setting for RATE and TIME parameter ]
Parameters
EFFECT
ON/OFF
MLT CMP
XOVER
L
XOVER
H
SENS
H
SENS
M
SENS
L
MIX
H
MIX
M
MIX
L
EQ
H
EQ
M
EQ
L
BASS
ON/OFF
LEVEL
Divides the signal into three frequency bands and separately sets compressor and mix for each.
Also includes 3-band equalizer.
EFFECT
ON/OFF
LO-FI
CHARA COLOR
DIST
TONE
EFX
LVL
DRY
LVL
EQ H
EQ M
EQ L
BASS
ON/OFF
LEVEL
Simulates low-fi sound. Also includes 3-band equalizer.
EFFECT
ON/OFF
RESONNC
DEPTH
FREQ
RATE
TYPE
RESO
EFX
LVL
DRY
LVL
EQ H
EQ M
EQ L
BASS
ON/OFF
LEVEL
Resonance filter with LFO. Also includes 3-band equalizer.
Parameter name
Setting range
Parameter description
EFFECT ON/OFF
ON, OFF
Controls effect ON/OFF for each patch.
TYPE
MLT CMP, LO-FI, RESONNC
Selects from three available types.
XOVER L
50 - 16000
Sets the division point for low/mid frequency bands.
XOVER H
50 - 16000
Sets the division point for mid/high frequency bands.
SENS H
0 - 24
Sets the compressor sensitivity in the high range.
SENS M
0 - 24
Sets the compressor sensitivity in the mid range.
SENS L
0 - 24
Sets the compressor sensitivity in the low range.
MIX H
0FF, -24 - 6
Sets the high range mix amount.
MIX M
0FF, -24 - 6
Sets the mid range mix amount.
MIX L
0FF, -24 - 6
Sets the low range mix amount.
CHARA
0 - 10
Sets the filter characteristic.
COLOR
1 - 10
Adjusts the sound color.
DIST
0 - 10
Adjusts the distortion.
TONE
0 - 10
Adjusts the tonal quality.
DEPTH
0 - 10
Sets the effect depth.
FREQ
1 - 30
Sets the LFO offset.
RATE
1 - 30, t0 - t9, M1 - M4
Sets the effect rate. When set to "tx" or "Mx", rate is synchronized to
rhythm tempo (see Table 2).
TYPE
HPF, LPF, bPF
Selects the filter type.
RESO
1 - 30
Applies resonance to the effect.
EFX LVL
0 - 30
Sets the effect sound mix amount.
DRY LVL
0 - 30
Sets the original sound mix amount.
EQ H
-12 - 12
Applies boost/cut to the high range.
EQ M
-12 - 12
Applies boost/cut to the mid range.
EQ L
-12 - 12
Applies boost/cut to the low range.
BASS ON/OFF
ON, OFF
Switches bass effect processing ON/OFF.
LEVEL
1 - 30
Sets the patch output level.
Setting value
Frequency
Setting value
Frequency
Setting value
Frequency
t0
Thirty-second note
t5
Half note triplet
M1
Full note
t1
Sixteenth note
t6
Dotted eighth note
M2
Full note x 2
t2
Quarter note triplet
t7
Quarter note
M3
Full note x 3
t3
Dotted sixteenth note
t8
Dotted quarter note
M4
Full note x 4
t4
Eighth note
t9
Half note
RT223(E).fm 75 ページ ２００５年５月２６日 木曜日 午後１２時３分
