Changing Various Settings of the RT-223
ZOOM RT-223
67
swing. (The values stand for percent.) This item
influences only the playback timing. It does not
affect the recorded data of the pattern.
■
Setting the pad sensitivity (PAD
SENS)
Setting range: SOFT, MEDIUM, LOUD,
LIGHT, NORMAL, HARD, EX HARD
(Default: NORMAL)
This setting controls the pad sensitivity. The
following seven settings are available.
• SOFT
Low volume regardless of pad hitting intensity
• MEDIUM
Medium volume regardless of pad hitting
intensity
• LOUD
High volume regardless of pad hitting intensity
• LIGHT
Highest sensitivity setting. Results in loud
volume even when pad is hit only lightly.
• NORMAL
Medium sensitivity setting
• HARD
Low sensitivity setting. Pads must be hit hard
to produce volume.
• EX HARD
Lowest sensitivity setting. Pads must be hit
extra hard to produce volume.
■
Setting the playback timing shift
(SHIFT)
Setting range: -192 to +192 (Default: 0)
Shifts the playback timing of a specific track in
the currently selected pattern back or forth in
1-tick units (1/96 of a quarter note). The
maximum shift is ± 2 beats.
NOTE
• Once the setting is made, it cannot be
undone. Use this function with care.
• When you shift the playback timing of a
track, the preceding or following notes
are deleted.
■
Setting MIDI synchronization
message input on/off (MIDI)
Setting range: int, Ext (Default: int)
When this item is set to “Ext”, the RT-223 accepts
the following MIDI messages:
• MIDI clock
• Start/Stop/Continue
• Song Select
NOTE
When this item is set to “Ext”, real-time
input is not possible.
■
Setting the MIDI receive channel
for each track (MIDI)
Setting range:
oFF, 1 - 16, AUt (bass track
only) (Default: drum track = 10, bass track = 9)
This item sets the MIDI channel for each track.
Available settings for the drum track are oFF (not
received) and 1 - 16.Available settings for the
bass track are oFF (not received), 1 - 16, and AUt.
“AUt” is a special setting for playing GM
compatible standard MIDI files. When the RT-
223 receives a program change message for GM
bass sound, it automatically switches the bass
track to that MIDI channel.
When the [FUNCTION] key is pressed followed
by pad [()] (MIDI), the display for setting the
drum track/bass track MIDI receive channel to on
or off is shown. Hold down the [DRUM] key or
[BASS] key (current setting for the track is shown
on the display), and use the VALUE [+]/[-] keys
to change the setting.
■
Displaying the remaining amount
of memory (PATTERN)
Pressing the [FUNCTION] key followed by the
[PATTERN] key brings up a percentage display
of the remaining amount of memory. This display
is for information only, it cannot be changed.
RT223(E).fm 67 ページ ２００５年５月２６日 木曜日 午後１２時３分
