Chapter 3 Software Configuration
31
6.
For any remaining selections follow your ISP’s instructions. In
most cases the default settings are appropriate.
7.
Close the
Setup
dialog box.
8.
Choose
PPP Options
from the
File
menu.
Follow your ISP’s instructions for
Password Authentication
Protocol (PAP)
.
9.
Enter
User Name
and
Password
.
Follow your ISP’s instructions for where to enter the
initialization commands for your TA/V.34 or TA device.
For PPP connections, use the following initialization:
%A2=5%B39 S7=55
You will need to enter your provider’s phone number as well.
10.
If the software has a selection for tone or pulse dialing, select
tone dialing.
11.
If there is a way to enter a reset string for your TA/V.34 or TA
in the software, enter:
AT&F
Using ML-PPP Connections in Windows
3.1 or 3.11
Use the same setup as above, except that the initialization string should
be
%A2=6%B39 S7=55
Since ML-PPP uses two phone numbers to set up connections on both
B-channels, enter the two phone numbers separated by an ampersand
“&”. For example, if your provider’s two phone numbers are 555-1234
and 555-2345, you would enter:
5551234 & 5552345
Note that if both numbers are the same, you need to enter the same
number twice:
5551234 & 5551234
Note also that if you must make a long distance call for your
connection, both numbers must include the “1” prefix, and if the first
number requires an area code, so must the second. For example:
16175551234 & 16175552345