38
Zoom Cable Modem User’s Manual
Set them as follows (see the instructions near each one in
rc.config):
NETCONFIG="_0"
NETDEV_0="eth0"
IFCONFIG_0="dhcpclient"
Reboot with this command:
/sbin/shutdown -r now
.
Your computer should now come up on the cable network.
For Debian
Add the following line to the file
/etc/network/interfaces: iface
eth0 inet dhcp
.
Reboot with this command:
/sbin/shutdown -r now
.
Your computer should come up on the cable network.
This completes the installation of the modem. Most likely, your
web browser is set so that the cable modem connects to the Inter-
net correctly—it must connect via a LAN. If you need to adjust
your browser settings, however, turn to
Chapter 2
(page 17) for
instructions. Otherwise, skip to
Chapter 3
(page 20) to learn how
to get the most out of your modem.