83
4.
Remove the Ring Controller from
the Base Station.
If the effect or arpeggiator has a parame-
ter assigned, enable that function.
5.
Set the Ring Controller grip area.
Setting the grip area (
→
P. 98)
6.
Tilt the Ring Controller to control
the assigned parameters.
3.
Turn
H
in the SOUND area to
select the parameter.
You can select from the following
parameters.
Parameter
Explanation
None
No parameter assigned
EFFECT Knob1
Parameter 1 of the selected effect
EFFECT Knob2
Parameter 2 of the selected effect
01 SOUND Knob1
Parameter 1 shown on the SOUND display for
instrument 01
01 SOUND Knob2
Parameter 2 shown on the SOUND display for
instrument 01
02 SOUND Knob1
Parameter 1 shown on the SOUND display for
instrument 02
02 SOUND Knob2
Parameter 2 shown on the SOUND display for
instrument 02
…
…
16 SOUND Knob1
Parameter 1 shown on the SOUND display for
instrument 16
16 SOUND Knob2
Parameter 2 shown on the SOUND display for
instrument 16
ARPEGGIATOR
Rate
The speed of the arpeggiator output will change
in response to the tilt of the Ring Controller.
This is enabled only if the arpeggiator Style
is not “Sequence” and the “Pattern” is set to
1/1–1/32.
ARPEGGIATOR
Note
The notes output by the arpeggiator will change
in response to the tilt of the Ring Controller. The
notes will change according to the scales set in
the SCALE layout of each instrument.
(
→
P. 116)
Ring Contr
oller Performance
Contr
olling parameters with the Ring Contr
oller
Controlling parameters with the Ring Controller
(continued)
