or GUEST to create a Virtual LAN.
IP Address
Enter the IP address to be the default Cable
Modem/Router address for clients connected this guest
network.
Subnet Mask
Enter the subnet mask for this guest network.
Lease Pool Start
Enter the starting IP address of this DHCP address pool.
Lease Pool End
Enter the ending IP address of this DHCP address pool.
Lease Time
Enter the lease time for DHCP clients. DHCP clients will
resend DHCP request before expiration. Maximum value
is 86400 seconds.
UPnP Enable
Select Enabled to enable UPnP on your guest network
Firewall Enable
Enables or Disables the Firewall on your guest network.
DHCPv6 Server
Selecting Enabled allows the DHCP server to assign IPv6
addresses.
Restore Guest Network
Defaults
Click the Restore Guest Network Defaults button to
restore the Guest Network factory settings.
57
Summary of Contents for 5363
