6
56K Faxmodem Owner’s Manual
This owner’s manual is organized as follows:
Introduction (this section) lists the items you will need
to use the modem.
Installation (Chapter 1) explains how to install the modem.
Using the Faxmodem (Chapter 2) provides tips for
setting up your software.
Problems and Solutions (Chapter 3) provides
information to assist you if you have problems.
The Appendixes provide additional information for a
number of topics including tables that summarize AT
commands and S registers.
Follow the Quick Start guide’s instructions for quick in-
stallation of the hardware and software that is included
with this product. If you have questions that are not an-
swered in the Quick Start guide, follow the instructions
provided with your fax and data communications software
to install and use those programs.
What You Need to Use Your Faxmodem
Make sure that you have received the following
items:
•
Faxmodem
•
Phone cord
•
Power adapter (for external models only)
•
Fax and data communications software on floppy
disks. These floppies also contain some helpful
installation utilities for non-Plug and Play systems.
To use the faxmodem, you also need the
following:
•
For internal models, a computer with an available
IBM PC-compatible 16-bit ISA or EISA Bus slot.
•
For external models, an available serial port (also
called an RS-232 port, COM port, or modem port).
