3
Enter the appropriate information on the
WAN
Configuration
page. Use the table below as a guide.
For this setting…
Do this…
Current
Connection
Select
Enabled
from the drop-down list.
(That is, click the arrow
at the far
right of the box to view the items in the
list, then select
Enabled
.)
Encapsulation
Select your service provider’s
Encapsulation setting from the
drop-down list.
VPI
and
VCI
Enter the VPI and VCI settings for your
service provider. (If you do not know
these settings, refer to the
ADSL
Internet Settings Tables
on page 45.)
Bridge
and
IGMP
Ensure
that
Disabled
is selected from
both drop-down lists.
IP Address
and
Subnet Mask
Enter the values assigned to you by your
service provider for each.
Use DHCP
Ensure that the
Disabled
option button is
selected.
Default Route
Ensure that
Enabled
is selected from the
drop-down list.
Gateway IP
Address
Enter the value assigned to you by your
service provider.
Use DNS
Ensure that the
Disabled
option button is
selected.
Primary DNS
Server
Enter the value assigned to you by your
service provider.
Secondary DNS
Server
If your service provider gave you a
second DNS server address, enter it.
4
Click
Save Changes
on the
WAN Configuration
page.
5
You are redirected automatically to the
Basic Setup
page.
Click
Write Settings to Flash
.
Chapter 1: Installation Instructions
21
Summary of Contents for 1065
Page 1: ...ADSL X5 U S E R G U I D E ...
