If You Did Not Connect
If you did not connect and you are using settings provided by your
service provider, repeat steps 3–7 above and ensure that you enter
the information correctly (especially your
Username
and
Password
, if your
Encapsulation
begins with PPP). If you still
cannot connect, look up your provider in the
ADSL Internet
Settings Tables
on page 45 and try the setting(s) shown, if
different.
If you did not connect and were using settings from the
ADSL
Internet Settings Tables
, return to the tables and find the next
most frequently used settings—those labeled (2) if you just entered
(1), or (3) if you just entered (2), and repeat steps 3–7 above.
Using Static IP Addressing
If your Internet service provider’s
Encapsulation
setting is either
1483 Bridged
or
1483 Routed
, the X5 can be set for either a
Dynamic Host Configuration Protocol (DHCP) address (also
known as a dynamic IP address) or for a static IP address.
Because most Internet service providers use DHCP, the X5 is
set for dynamic IP addressing by default.
There is typically an extra charge for a static IP address, and you
usually have to make a special request to get one.
Important!
If you do not know what static IP addressing is or why you would
use it, you most likely do not need to change the default setting.
Only advanced users who specifically want to use static IP
addressing and/or those users whose IP provider specifically
instructed them to use static IP addressing should change this
setting.
1
Click the
Advanced Setup
icon at the top of any page in
the Zoom Configuration Manager to open the
Advanced
Setup
page.
2
Click the
WAN Configuration
button, located in the
Configuration
group.
20
ADSL X5 User Guide
Summary of Contents for 1065
Page 1: ...ADSL X5 U S E R G U I D E ...
