Chapter 1: Installation Instructions
19
Tip:
If you do not know your
Username
and
Password
,
contact your service provider and tell them that you
misplaced the information.
¾
If your Encapsulation setting begins with 1483
Bridged or 1483 Routed:
The
Username
and
Password
boxes will automatically disappear from the page because
you do not need to enter this information. Continue with
step 5.
Important!
If you plan to use a static IP address, you must manually
configure the X5 from the
WAN Configuration
page and
not the
Basic Setup
page. For more information, see
Using Static IP Addressing
on page 20. Typically, you
must make arrangements with (and pay) your Internet
service provider for a static IP address.
5
In the
VPI
and
VCI
boxes, enter the settings for your service
provider.
6
Click
Save Changes
and then
Write Settings to Flash
. Once
the process is complete, the X5’s
DSL
light should remain on
steady (this should take about 15 seconds).
7
Verify that your Internet connection is working. Open your
Web browser and try to connect to a familiar Web address.
If you connect successfully, your installation is complete
and you are ready to browse the Web!
If you want to connect more computers or a network device to
the X5, continue with
Connecting Additional Devices to
the Internet
on page 22. Otherwise, you are done with this
user’s guide. Enjoy your X5!
Summary of Contents for 1065
Page 1: ...ADSL X5 U S E R G U I D E ...