11-REAR COVER COMPONENT
85
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
2
2
1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
2
3
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
2
4
1240300-007000 HJ125
－
6 Battery rubber gasket
5
5
1274300-051000 ZT350
－
GK battery bracket
1
6
1274300-048000 ZT350
－
GK electric device box connection bracket
1
7
1224300-053000 ZT350
－
GK battery bracket clip
1
8
1251300-063093 Plywood M6×11×15
（
color zinc
）
2
9
1224300-017000 ZT350
－
GK electric device box
1
PROCEDURE:
●
Connecting bracket
After grasping the connecting bracket (6), remove the bolt (1) with 4# hexagon socket, and remove the bushing
(2) and buffer rubber (3). Remove the connecting bracket (6).
●
Battery support
Grasp the battery support assembly, remove the bolt (1) with 4# hexagon socket, and remove the bushing (2)
and buffer glue (3).
Remove the battery support assembly.
Tear off the battery rubber pad (4) directly by hand and clean up the residual rubber.
The clamp (7) is clamped on the battery support through the boss. If it needs to be removed, press the boss with
a large force before taking it out.
Remove two plywoods (
8
) from the electrical device box (
9
).
CAUTION
：
●
The parts should be protected during discomponent to prevent scratching.
Fig.6 REAR COVER
COMPONENT
Electric device box component 2
