7-FRONT FORK COMPONENT
53
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc)
1
2
1224100-044000 Wheel speed sensor clamp
3
3
1251100-080094 Non
－
standard bolt M8×37(color zinc)
2
4
1224100-037000 Grade 0 flame retardant tie (black 3.6×295)
2
5
1251100-101000 Non
－
standard bolt M6×12 (304 stainless steel)
1
6
1184200-045000 DF30 wheel speed sensor
1
7
1251100-102000 Non
－
standard bolt M6×16(304 stainless steel)
6
8
1274100-057095 Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
6
9
1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1)
6
10
Front mud board component
1
11
1274200-038000 ZT310
－
X Front fender front oil outlet pipe fixed seat
1
12
1250402-001091 GB12615 φ3×10 Rivet
1
PROCEDURE:
●
Wheel speed sensor
Pull out the plug of the wheel speed sensor
⑹
; then remove 3 pcs clamp
⑵
. Cut off the belting
⑷
.Using 4#
inner hexagon socket remove bolt
⑸
,take off the bolt
⑹
.
●
Front disc brake caliper
Using 8# sleeve remove bolt
⑴
and using 14# sleeve remove bolts
⑶
,so that the caliper will hang down
naturally. It is forbidden to invert the caliper toprevent the air from entering and causing the brake to fail.
●
Front mud board component
Hold the front mud board componet
⑽
with your hand and then remove the 6 bolts
⑺
with a 4# inner hexagon
socket and remove the bushing
⑻
and cushion rubber
⑼
.
Remove the front mudguard
⑽
.
The inside of the front mudguard can be protected with reticle or double-sided tape around the rivet
⑿
, then the
rivet
⑿
is ground off with a small sander, and then the rivet
⑿
and the fixing seat
⑾
are removed.
CAUTION:
●
The motorcycle support should be fixed during the disassembly process to prevent accidents caused byincline.
●
Disassemble the oil pipe clamp and the sensor wire clamp should pay attention to the strength.
●
Pay attention to the strength when disassembling the front mud plate to prevent scratching the paint surface.
●
Rivets need to be assembled with professional tools.
U front mud board & wheel speed sensor component
Fig.10 FRONT FORK
COMPONENT
after-sales
