7-FRONT FORK COMPONENT
49
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1194100-002000 ZT250
－
S right rearview mirror
1
3
1134100-032000 ZT250
－
R Right handle rocker (Machine)
1
4
1131200-017000 KD150
－
U hand guard
1
5
1250205-085000 GB70.1M6×70 (stainless steel)
1
6
1244100-042000 ZT250
－
R right handle bar rubber sleeve
1
8
1250205-031091 GB70.1M6×30(stainless steel)
2
PROCEDURE:
●
Rearview mirror
Hold the mirror stem in one hand, remove the nut
④
with a 13# sleeve, and remove the small pad
③
, the spring
②
and the large pad
①
. Remove the mirror from the front brake master pump.
●
Right handlebar to put rubber sleeve,hand guard
Using 5# inner hexagon socket remove bolt
⑸
,take off the hand guard
⑷
,then take off the rubber sleeve
⑹
.
●
Right handle switch
Hold the front disc brake main pump
⑵
with one hand, and remove the bolt
⑻
with a 5# inner hexagon socket
.Refer to the steps of removing the headlight assembly, first rotate the headlamp assembly forward and find the
line plug connector of the auxiliary switch
⑺
and remove it.
CAUTION:
●
The motorcycle should be fixed after horizontal support.
●
Periodically check that the fluid level of the brake fluid is between 3/4 of the observation window.
●
Do not flush the cup directly with high pressure water.
●
The small spacer of the rear view mirror anti-rotation limit slot needs to be aligned with the slot on the mirror
bar bolt.
●
The right handlebar refers to the switch to replace the throttle line.
●
The joint between the front disc brake main pump and the half cover should be aligned with the right hand to
match the triangle on the switch.
7
1184200-147000 ZT310
－
R second generation right sub
－
handle
switch (TFT)
1
1100300-044000 ZT125T front disc main pump assembly(without
rocker arm)
1
2
Fig.6 FRONT FORK
COMPONENT
Right hand component
