V3R Mounting
1)
Follow all General Guidelines as specified on page 6.
2)
Suggested mounting areas:
See page 14.
A) Box type trailers - Left side rooftop (preferred) or
front vertical surface (alternate)
B) Construction equipment - Protected from moving
equipment, impact damage and high heat areas
3)
Antenna Configurations:
A) GPS antenna - V3R utilizes an internal GPS antenna. This
antenna works well when the unit has a clear view of the
sky (e.g. atop box trailer. If the V3R does not have a
clear/unobstructed view of the sky (e.g. engine
compartment) an external GPS antenna must be used.
B) GSM (cellular antenna) - V3R utilizes an internal GPS
antenna. Cellular signals are quite robust and are not
easily degraded. As a general rule, if your cellular telephone
works in the location you have installed the V3R, this
should satisfy the GSM/Cellular requirements of the V3R.
Fig. 7-1
4)
Mount onto interior flat surface large enough to accommodate
footprint.
5)
Avoid mounting equipment in difficult to access areas.
6) If enclosing in a radio-shielded area (e.g., metallic enclosure)
an external GPS antenna will be necessary for proper operation
and performance.
7)
Avoid mounting Zonar Equipment, antennas and wiring near
other radio equipment (e.g.,two-way radios), PA equipment
and high energy electrical sources (e.g., cables, relays,
amplifiers, etc.).
8)
Avoid mounting equipment in dirty, dusty, or damp areas.
9)
Please take note of:
•
GPS ID number – Found on white sticker on GPS unit
•
Vehicle or Asset number (e.g. Bulldozer #56)
Note:
Your Zonar Customer Care Representative or Ground Traffic
Control Administrator will need this information.
V3R MOUNTING
Fig. 7-2
Bolt
Mount
(Provided)
Magnetic
Mount
(Provided)
7
Mount V3R Facing
Skyward
7
