External GPS Antenna and Double Sided Adhesive
(Optional)
1) Required when the V3R does not have an upward facing clear
view of the open sky.
2) Suggested mounting area - as high on the vehicle as possible,
facing upward. Protect from moving machinery and falling
debris.
3) Follow all General Guidelines as specified on page 6.
4) May be magnetically mounted or mounted via optional aluminum
plate and screw for non-magnetic surfaces, see Fig. 10-1.
5) Ensure a clear antenna view of the open sky.
6) Maintain a minimum of 6 inches from any rooftop edge or ledge,
see Fig. 10-1.
7) Drill, deburr, grommet, weather seal, cable thru hole as required.
Drill hole size - 1/2” (.500”); grommet size - 3/8” (.375”).
8) Protect exposed GPS cable with automotive grade impact and
cut resistant loom.
Note
:
For optimal system performance Zonar recommends rooftop
mounting with a clear view of the sky.
Fig. 10-2
ANTENNA INSTALLATION
10
•
Allow a minimum of
6 inches from any
edge or ledge
• Drill hole size: 1/2” (.500”)
• Grommet size: 3/8” (.375”) I.D.
• Drill, Deburr, grommet, weather
seal, cable thru hole as required
1” - 2”
recommended
Fig. 10-1
