ZOLL AutoPulse 100, User Manual

Page: 16 / 88

Page 1-4
User Guide
Battery Charger: The Battery Charger is a stand alone unit designed to charge and automatically maintain
the Li-Ion Battery. The Battery Charger has two charging bays, and each bay has its own indicators.
The Battery should always be properly maintained and be fully charged and ready for use before
deploying the AutoPulse.
For more information, refer to the AutoPulse Power System User Guide .
1.4 User Controls and Indicators
1.4.1 On/Off Button
The On/Off button is located adjacent to the Battery on the Platform (see Figure 1-3).
Figure 1-3 On/Off Button Location
1.4.1.1 On/Off Button
1.4.2 User Controls
All user controls and indicators (except the On/Off button) are contained in User Control Panel (see
Figure 1-4).
When the AutoPulse Battery is inserted into the AutoPulse Platform, the
Platform is in “stand-by”, and ready for activation by the On/Off button.
Pressing the On/Off button once then powers up the Platform and initiates a self-
test. The User Control Panel's green Power LED lights up. Pressing the On/Off
button again powers down the Platform and returns it to “stand-by”.
ON/OFF button
User Control Panel