ZOLL 330, Service Manual, Page: 29 / 86

Replacement Part Installation
9650-000278-01 Rev. B ZOLL 330 Multifunction Aspirator Service Manual 3–3
Battery Compartment Replacement
These instructions describe how to remove and replace an aspirator battery compartment.
Required Tools and Other Items
•
Torque driver
•
#2 Phillips-head
•
Vibra-Tite
Instructions
Step Action
1 Remove the battery compartment cover by unscrewing the four 6-32 x 5/16 screws.
Save these screws.
2 Remove the battery by unscrewing the four 6-32 x 2 1/4 screws, and then disconnect
the plug from its connector.
Save these screws.
3 Remove the four 6-32 x 5/16 Phillips screws that battery compartment, and then
remover the battery compartment.
Save these screws.
4 Position the new battery compartment to mate with upper and lower case cutouts and
press firmly into place.
Clean screws and apply Vibra-Tite to each of the four 6-32 x 5/16 screws, re-insert,
and then tighten.
Torque: 9 in lbs.
Bit Size: #2 Phillips head