ZOLL 330, Service Manual, Page: 27 / 86

9650-000278-01 Rev. B ZOLL 330 Multifunction Aspirator Service Manual 3–1
Chapter 3
Replacement Part Installation
Overview
This chapter provides instructions on how to disassemble and reassemble the 330 Multifunction
Aspirator unit, and includes the following sections:
•
Required Equipment
•
Safety Precautions
•
Battery Compartment Replacement
•
Battery Compartment Cover Replacement
•
Battery Replacement
•
Back Cover Replacement
•
Power Input Assembly Replacement
•
Exhaust Muffler Block and Baffle Replacement
•
Exhaust Muffler Foam Replacement
•
Power Interface Module Installation
•
Smart Aspirator Module (SAM) Replacement
•
Vacuum Pump Replacement
•
UIM Adapter Board Replacement
•
UIM Stack Assembly Replacement
Required Equipment
To perform replacement installation procedures, you need the following:
•
Anti-static wrist strap
•
Torque driver with interchangeable screw and nut bits
(or torque screwdriver set and torque nut driver set)
•
Needle-nosed pliers
•
Vibra-Tite